THREE MONTHS INTENSIVE TRAINING ON INDUSTRIAL ELECTRICAL INSTALLATION AND MAINTENANCE

COURSE TITLE:
INDUSTRIAL ELECTRICAL INSTALLATION AND MAINTENANCE

OVERVIEW:
The course has been designed for candidates in the industry and those wanting a viable entry route into the electrical industry. The course teaches the fundamental concepts of electrical wiring, including the industry-standard components used by electricians, technicians, and engineers to install, operate, repair, and design equipment for modern industry. It will enable candidates who have a small amount of electrical knowledge to gain recognised qualifications and skills to enable them to enter an industrial environment and work as industrial electricians. The course is designed to be as practical as possible, enabling the candidate to gain the maximum amount of exposure to ‘real life’ equipment.

OBJECTIVES:
On completion of the course, participants will be able to
• Identify a wide range of electrical equipment & devices and understand their principles of operation / connections
• Understand how to interpret drawings, diagrams, specifications and manufacturers data to locate, position, install and connect wiring systems, components, wiring enclosures and equipment
• Use circuit diagrams as an aid to maintenance
• Practice safe working methods on electrical systems
• Use electrical test equipment effectively and carry out testing of a range of motors, solenoids, cables, etc. (using insulation, continuity, tong testers, etc.)
• Understand the principles of earthing / protection and associated protective devices
• Demonstrate an understanding of electrical systems, switchgear and circuit types
• Work with a range of cable types and carry out correct terminations and connections
• Recognise the most common industrial motor types and understand their operation, connections and maintenance requirements
• Identify motor and power circuit faults
• Access electrical enclosures and replace fuses, reset overloads etc
• Perform electrical isolation, testing for dead, etc on a wide range of devices and circuits safely.
• Design, construction and operation of a dol (direct on line) starter
• Diagnose basic faults and recognise their associated symptoms
• Etc….

COURSE CONTENT:
• Introduction to Electrical Power Systems and Machines
• Electrical, Instrumentation and Process Standards, Drawings and Documentation
• General Electrical Safety and Switching Practices
• Basic and Specialty Electrical / instrumentation Tools and Test Instruments
• Electrical Power Generation Systems, Operation and Maintenance
• Electrical Power Transmission Systems, Operation and Maintenance
• Electrical Power Distribution Systems, Operation and Maintenance
• Electrical Power Utilization Systems, Operation and Maintenance
• HMI, PLC, DCS, SCADA and System Integration
• Electrical Power Cables and Accessories
• Electrical Installation Design and Drafting
• Advanced Electrical Power Systems Troubleshooting Techniques, Equipment Maintenance and commissioning

DURATION:
3 MONTHS

METHODOLOGY:
The training will consist of lectures, exercises and intensive hands-on training. The training will be delivered through power point presentations, Illustrative reading materials and practical activities. Participants will be given opportunities to work with a wide range of equipment that will support their knowledge in the field.

TIME:
9:00am - 4:00pm Daily

VENUE:
No. 36 Redeemed Road, Off Rumuodara-Eneka Road, Eliowhani, Port Harcourt, Rivers State, Nigeria.

COURSE FEE:
N150,000

ACCOMMODATION IS AVAILABLE FOR TRAINEES

OTHER AVAILABLE COURSES
 Industrial Electrical Installation And Maintenance
 Hazardous Area Equipment Design, Installation, Inspection And Maintenance
 Electrical Design And Drafting
 Electrical Drafting, Contracting And Maintenance
 Electrical Power System Protection
 Electrical Inspection, Testing And Commissioning
 Advanced Electricity Metering Design, Installation And Maintenance
 Ups, Solar PV And Inverter Installation And Maintenance
 Instrumentation, Control And Automation
 Instrumentation Design And Drafting
 Industrial Automation
 Analytical Instrumentation And Data Management
 Instrumentation And Control Systems, Inspection, Testing And Commissioning
 Heating, Ventilation And Air-Conditioning (HVAC)
 Industrial Safety
 Mechatronics Engineering

FOR MORE INFORMATION CONTACT:
Phone: 09085435425, 09054438645
Email: kufmantsl@gmail.com
Website: https://kufman.business.site

Kufmantsl:
THREE MONTHS INTENSIVE TRAINING ON INDUSTRIAL ELECTRICAL INSTALLATION AND MAINTENANCE

COURSE TITLE:
INDUSTRIAL ELECTRICAL INSTALLATION AND MAINTENANCE

OVERVIEW:
The course has been designed for candidates in the industry and those wanting a viable entry route into the electrical industry. The course teaches the fundamental concepts of electrical wiring, including the industry-standard components used by electricians, technicians, and engineers to install, operate, repair, and design equipment for modern industry. It will enable candidates who have a small amount of electrical knowledge to gain recognised qualifications and skills to enable them to enter an industrial environment and work as industrial electricians. The course is designed to be as practical as possible, enabling the candidate to gain the maximum amount of exposure to ‘real life’ equipment.

OBJECTIVES:
On completion of the course, participants will be able to
• Identify a wide range of electrical equipment & devices and understand their principles of operation / connections
• Understand how to interpret drawings, diagrams, specifications and manufacturers data to locate, position, install and connect wiring systems, components, wiring enclosures and equipment
• Use circuit diagrams as an aid to maintenance
• Practice safe working methods on electrical systems
• Use electrical test equipment effectively and carry out testing of a range of motors, solenoids, cables, etc. (using insulation, continuity, tong testers, etc.)
• Understand the principles of earthing / protection and associated protective devices
• Demonstrate an understanding of electrical systems, switchgear and circuit types
• Work with a range of cable types and carry out correct terminations and connections
• Recognise the most common industrial motor types and understand their operation, connections and maintenance requirements
• Identify motor and power circuit faults
• Access electrical enclosures and replace fuses, reset overloads etc
• Perform electrical isolation, testing for dead, etc on a wide range of devices and circuits safely.
• Design, construction and operation of a dol (direct on line) starter
• Diagnose basic faults and recognise their associated symptoms
• Etc….

COURSE CONTENT:
• Introduction to Electrical Power Systems and Machines
• Electrical, Instrumentation and Process Standards, Drawings and Documentation
• General Electrical Safety and Switching Practices
• Basic and Specialty Electrical / instrumentation Tools and Test Instruments
• Electrical Power Generation Systems, Operation and Maintenance
• Electrical Power Transmission Systems, Operation and Maintenance
• Electrical Power Distribution Systems, Operation and Maintenance
• Electrical Power Utilization Systems, Operation and Maintenance
• HMI, PLC, DCS, SCADA and System Integration
• Electrical Power Cables and Accessories
• Electrical Installation Design and Drafting
• Advanced Electrical Power Systems Troubleshooting Techniques, Equipment Maintenance and commissioning

DURATION:
3 MONTHS

METHODOLOGY:
The training will consist of lectures, exercises and intensive hands-on training. The training will be delivered through power point presentations, Illustrative reading materials and practical activities. Participants will be given opportunities to work with a wide range of equipment that will support their knowledge in the field.

TIME:
9:00am - 4:00pm Daily

VENUE:
No. 36 Redeemed Road, Off Rumuodara-Eneka Road, Eliowhani, Port Harcourt, Rivers State, Nigeria.

COURSE FEE:
N150,000

ACCOMMODATION IS AVAILABLE FOR TRAINEES

OTHER AVAILABLE COURSES
 Industrial Electrical Installation And Maintenance
 Hazardous Area Equipment Design, Installation, Inspection And Maintenance
 Electrical Design And Drafting
 Electrical Drafting, Contracting And Maintenance
 Electrical Power System Protection
 Electrical Inspection, Testing And Commissioning
 Advanced Electricity Metering Design, Installation And Maintenance
 Ups, Solar PV And Inverter Installation And Maintenance
 Instrumentation, Control And Automation
 Instrumentation Design And Drafting
 Industrial Automation
 Analytical Instrumentation And Data Management
 Instrumentation And Control Systems, Inspection, Testing And Commissioning
 Heating, Ventilation And Air-Conditioning (HVAC)
 Industrial Safety
 Mechatronics Engineering

FOR MORE INFORMATION CONTACT:
Phone: 09085435425, 09054438645
Email: kufmantsl@gmail.com
Website: https://kufman.business.site

Hmmm