Working Principle of cattle licking salt block machine
Mix the materials and add them to the upper hopper after the equipment. The materials in the hopper are added to the feeding frame in a quantitative manner.

The feeding cylinder drives the feeding frame forward, adding the material into the mold, and then the feeding cylinder returns to its position.

The sub-cylinder drives the piston rod and punch of the main cylinder to press down quickly. When the punch enters the mold cavity, the sub-cylinder turns into the main cylinder to slowly pressurize, and the materials in the mold are pressed into high-density bricks by high pressure (de-molding) The floating cylinder descends at the same time to realize two-way floating suppression).

The main cylinder rises slightly (the punch does not come out of the mold), and the demolding floating cylinder drives the mold frame to fall and pull the licking bricks out of the mold.

The core cylinder pulls out the core rod, the sub-cylinder and the main cylinder rise, and the feeding cylinder advances to push out the finished product while the feeding frame moves to the top of the mold.

The demolding cylinder drives the mold frame to rise to form a cavity to complete the feeding and enter the next cycle program.