Brother printer error 48, occurs due to a broken or damaged print head cable or circuit board and any mechanical breakdown in the printer. Brother printers are quite reliable and known for high-end printing performance. But at times due to malfunctioning, it is unable to print Brother printer error 48. Whenever this error 48 appears on the screen, it means you have to fix it. And most of the Brother printer users, don’t know how to do so. But do not worry, this error is curable and you can resolve it very easily. You just have to restart your, restart device to fix all the minor glitches, and it is the universal method yet.

Steps to Restart Brother Printer:
Brother printer is known for its excellent quality and components. Fixing Brother printer error 48 is a very simple job. Obey the below steps to restart your printer.

* Turn on the Brother printer by pushing the power button.
* Then detach the cables from the printer.
* And take out the power cord from the wall outlet.
* After this wait for at least 4-5 minutes.
* Then after waiting, plug the power cord back into the wall outlet.
* And also plug the cables back into the printer.
* At last, turn the printer on by pressing the power button on the printer.
* And whether the problem still prevails or not.

Sum Up:

Hopefully, the above steps will help you in decoding Brother printer error 48. Brother printers are well-built and provide high page yields and their ink or toner cartridges require less replacing. It is necessary to go through each step, in order to fix it.

Brother Printer Error 48 is an indication of a fault in the print head cable or the head itself. Here are some steps you can take to fix the issue:

Restart the printer: Turn off the printer and unplug it from the power source. Wait for a few minutes and plug it back in and turn it on.

Check for any paper jams: Check if any paper is jammed inside the printer. Remove the jammed paper if there is any.

Check the ink cartridges: Make sure the ink cartridges are installed properly and not empty. Replace any empty cartridges.

Clean the print head: Clean the print head to remove any clogs or debris. You can use the built-in cleaning function on the printer, or you can manually clean it with a lint-free cloth.

Reset the printer: If the issue persists, try resetting the printer by unplugging it from the power source and leaving it unplugged for several minutes before plugging it back in.

Greetings,
Peter