Anyone with programming skills for fanuc, mazak, Siemens, etc. Of computer numeric control (CNC) Lathe turning machine? I want to learn it.

eezor:
Anyone with programming skills for fanuc, mazak, Siemens, etc. Of computer numeric control (CNC) Lathe turning machine? I want to learn it.

Model/design in Fusion 360 or any other CAD software and generate a post-processor base on the type of machine! It’s the best modern way of generating Gcode and Mcode

Capslock01:


Model/design in Fusion 360 or any other CAD software and generate a post-processor base on the type of machine! It’s the best modern way of generating Gcode and Mcode

I have all that. It doesn't really work that way during operations. Micron # , I used fusion360 and mastercam. The threading cycle using gcode 92 and others are something else. If you rely on it, you can jam the CNC machine. Am talking based on experience. For example, every fanuc has its own series. And programming sequences differs

eezor:

I have all that. It doesn't really work that way during operations. Micron # , I used fusion360 and mastercam. The threading cycle using gcode 92 and others are something else. If you rely on it, you can jam the CNC machine. Am talking based on experience. For example, every fanuc has its own series. And programming sequences differs

You’re right on this but not too right.
That’s why you have to check for post-processors before exporting to machine.
Sometimes, you’ll have to modify for existing similar machines. And there’s even one website that you can drop your machine type and someone will help you out with the editing.


Most time one google the machine post-processor and forums will pop up.

Example of such forum is attached.