The printer is rather noisy during work, which in fact can be a little bother. The way to solve the problem is changing fans, but we need to remember not to neutralize acoustic nuisances at the expense of the device’s efficiency, because it’s the priority. Some complain that Z axis has a slightly uneven surface because of a too stiff connection of engines with the trapezoidal screw. This fault can be minimalized by elastic connectors available on the market. The problem can also result from the table’s texture. The small dots covering the table’s surface are supposed to guarantee ideal adhesion, but in consequence after executing the print it’s hard to rip the particular element from the table. We should then wait until the heated up surfaces cool down, and the problem disappears. But these small inconveniences aren’t usually so burdensome, and they don’t bother most users. Nevertheless it must be remembered that the equipment has plenty of movable parts, and these in the case of long-term and frequent exploitation simply wear down. Every now and then, though slight cosmetic operations are necessary, such as oiling the rods and pulling the straps in order for them to keep stable and properly, or replacing the linear bearing. Taking care of the equipment does ensure satisfaction from its use.

Advantages of Anycubic I3 Mega Ultrabase
The printer allows to install a functional Cura program, which in turns provides access to convenient and simple tools for cutting and freely transforming the models. The printer has a very solidly a professionally made components, which make for a neat and useful composition. The extruder and engines don’t make troubles, and the endstops do not move. A considerable facilitation is print directly from SD card, which makes the computer free, so it can be used for other purposes. Basic functions of the equipment can be initiated from the display level. The printing device Anycubic I3 Mega Ultrabase has also a function of print resumption in case of emergency power outage. The printer remembers at what state the printing process was interrupted, and it resumes exactly in the same moment, which allows to save time and doesn’t make it necessary to set the printing parameters anew. It’s also worth mentioning that the price of Anycubic I3 Mega Ultrabase seems quite attractive in comparison with the cost of purchase of other modern Online 3D printers. [https://www.3ddrucklife.de/en]

🤔🤔🤔🤔🤔